Summary of Contents for G-EMF XEA

Page 1: ...ation of catching devices 2 3 Product description 3 3 1 EMF 3 3 2 Technical data 3 4 Installation 3 4 1 Prepare the mounting of the slide rail 3 4 2 Mount the slide rail 3 4 3 Mount the door closer 3 5 Start up 4 5 1 Set the fixture point 4 5 2 Set the release force 4 5 3 Mount the paneling 4 5 4 Check locking 4 6 Operating 4 6 1 Open and lock door 4 6 2 Close door 4 7 Dismounting recycling and di...

Page 2: ...nverted Illustration shows mounting DIN R on the hinge side Mounting DIN L takes place mirror inverted 1 4 3 Tool symbols Allen wrench e g wrench size 3 1 5 Glossary EMF Electromechanical locking device RMZ Smoke detection panel TS Door closer 2 Safety 2 1 Intended use The catching device is used to keep open door leaves The locking mechanism is used in conjunction with external RMZ to keep open f...

Page 3: ...xternal RMZ 4 Installation The mounting of the slide rail system takes place directly on the base of the door lintel or optionally with an additional mounting plate extras 4 1 Prepare the mounting of the slide rail The slide rail can be mounted in two different options Option A Mounting on the hinge side Option B Mounting on the opposite hinge side 1 Prepare the power supply 24 V 48 V DC from the ...

Page 4: ...width and the selected size of the closing contact According to the DIN EN 1155 the release force must not be less than 40 Nm at a door opening angle of 90 and not more than 120 Nm 1 Set the release force 2 Control the release force 5 3 Mount the paneling 1 Attach the end caps 2 Mount the paneling of the glide rail 5 4 Check locking 1 Open the door leaf and lock it 2 Cut off power supply The door ...

Reviews: