About this document
Technical Manual
7
04043552 - 07/2017
Terminal 97 00
1 About this document
1.1
Validity
This document describes the product:
Product designation:
Terminal 97 00
Product ID:
9700-K6
Item number
04079701
Terminal software:
735-05-X-K02 - B-Client HR30
BaseApp:
771-05-X-K02
Kaba test program
797-05-X-K02
Date of manufacture:
From April 2017
This document describes all product versions and all optional features and functions. Options
are subject to a charge and therefore only available if purchased. Additional features and
functions may not be available at the time the document is issued and may only be available
for purchase at a later date.
1.2
Target group
This quick start guide is intended for skilled persons only.
The descriptions are intended for skilled persons trained by the manufacturer. The descrip-
tions are no replacement for product training.
For reasons of equipment safety, the installation, maintenance and service measures de-
scribed in this documentation should only be carried out by skilled persons in accordance with
EN 62368-1 (Audio/Video, Information and Communication Technology Equipment – Part 1:
Safety Requirements).
Skilled person is the designation for people who have the appropriate technical training and
experience in setting up the equipment. Skilled persons are expected to use their training and
experience to identify any risks to themselves and others that may arise while carrying out
these activities, and to minimise these risks as far as possible. It is the skilled person’s re-
sponsibility to ensure that the conditions stated by the manufacturer and the applicable regu-
lations and standards are complied with when carrying out these actions.
This documentation is also used to provide information for persons with the following tasks:
•
Project planning and implementation
•
Putting the product into operation within a network
•
Connecting the product to the user software by programming customer applications
•
Customer-specific adjustment through parameter setting on the product
1.3
Content and purpose
Content is limited to the assembly, installation, commissioning and basic operation of the
product.