Head office:
38 Redfern St
Wetherill Park NSW 2164
Australia
Ph: 1300 132 389
Fax: 1300 652 292
www.doric.com.au
DS2500
I
FLUSH MOUNT MORTICE
SLIDING DOOR LOCK
INSTALLATION GUIDE
2
Fork
M3
fixing
screw
Rotate
180°
STEP 1:
SET LOCKBODY
The
Fork
at the rear of the lockbody should be
oriented so that it is
closest to the internal side
of
the door (i.e. toward the snibbed furniture side).
If the fork is in the incorrect orientation for your
door application:
Remove the M3 fixing screw,
Rotate the fork 180 degrees,
and re-tighten fixing screw.
Depending on your selected configuration
you will need to place the furniture in
either the locked or unlocked position.
Double/Single Cylinder
Configuration
Cylinder on Internal & External
or,
Cylinder on Internal
Furniture needs to be placed in
the locked position as indicated
by the arrows aligning.
No Cylinder Configuration
Latching only, no cylinders
Furniture needs to be placed
in the unlocked position as
indicated by the arrows
being misaligned.
STEP 2:
SET FURNITURE
LOCK CONFIGURATION
INTERNAL SIDE
EXTERNAL SIDE
INTERNAL SIDE
EXTERNAL SIDE
