FAL.OM.002372.DRM
Page 9 of 62
Version 1.6draft2
Doremi Labs
1 Introduction
1.1 Overview
The AccessLink is an audio distribution system that is used with non-Doremi cinema servers to
provide two stereo channels from a single transmitter unit to a number of receiver units.
AccessLink is designed to interface with the Fidelio system to enhance and assist people who
are visually and/or hearing impaired in a motion picture theater. This manual will guide you
through the steps necessary to physically set up and connect the AccessLink device. The entire
AccessLink setup consists of a Transmitter, Fidelio Receiver, Charging/Configuration Station,
Touch Screen Tablet, Audio Interface Box and Headset. The Fidelio Receiver device docks to
the charger, which can be used for multiple purposes including:
Recharging the battery
Configuration
Upgrading firmware
Production tests
1.2 AccessLink System Parts
AccessLink Transmitter Box (Doremi P/N: ACCESSLINK)
AccessLink Transmitter Antenna (Doremi P/N: FIDELIO-TX-ANT)
2 meter USB cable A-B (Doremi P/N: CBL-USBA-USBB-6)
Fidelio Audio Interface Box (FIS)
o
Doremi P/N for Doremi Servers: FIDELIO-AI (DB25 or RJ45 setups)
o
Doremi P/N for GDC: FIDELIO-AI (DB25 or RJ45 setups)
o
Doremi P/N for Sony: FIDELIO-AI-S (DB25 only setups)
o
Doremi P/N for Dolby: FIDELIO-AI-S (DB25 only setups)
1 Meter DB25 cable, M-F, 1-to-1 pin out (Doremi P/N: CBL-DB25M-DB25F-2.5)
Fidelio Receiver with Belt-clip (Doremi P/N: FIDELIO-RX)
Fidelio Headphone (Doremi P/N: FIDELIO-RX-HP)
Fidelio Charging Station (Doremi P/N: FIDELIO-WAC)
7” Tablet Mounting Bracket (Doremi P/N: MTL-FIDELIO-WAC-BRTS)
(4) - M3x6 Black Flat Head Machine Screws (Doremi P/N: M3x6MM-BFH)
4” Nylon tie-wrap, black (Doremi P/N: CBL-TIE-4IN)
(1) -
7” Touchscreen Tablet Computer (v1.1.2 or v2.2.0) – FIDELIO-TS
(1)
– For Tablet v1.1.2 - USB Cable, Mini A - Type A - No Part Number
For Tablet v2.2.0 - USB Cable, Micro B
– Type A–CBL-FIDELIO-TS-MICROB-AF
5V Power Supply with dual connectors (Doremi P/N: PS-HDVI)
AC Power Cable (Power Cable)
