background image

*

Failure to follow these warnings and assembly instructions could result in serious injury or death.

*

Read all instructions before assembling crib.  

KEEP INSTRUCTIONS FOR FUTURE USE.

*

*

*

Stop using crib when child begins to climb out or reaches the height of 35 inches (89 cm).

*

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, 

unless otherwise advised by your physician.

* DO NOT

 place crib near window where cords from blinds or drapes may strangle a child.

*

Strings can cause strangulation!  

DO NOT

 place items with a string around a child's neck, such as hood 

strings or pacifier cords.

 DO NOT

 suspend strings over a crib or attach strings to toys.

*

To help prevent strangulation tighten all fasteners.  A child can trap parts of the body or clothing on loose

fasteners.

*

If refinishing, use a non-toxic finish specified for children's products.

*

When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, 

large toys and other objects that could serve as steps for climbing out.

*

Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.

*

Replace teething rail if damaged or loose (if teething rail is provided for this model).

*

Follow warnings on all products in a crib.

* CAUTION:  ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST  27-1/4 INCHES BY 

51-5/8 INCHES (69CM BY 131CM) WITH A MINIMUM THICKNESS OF 4 INCHES (10CM)  

BUT NOT EXCEEDING 6 INCHES (15CM).

*

Infants can suffocate in gaps between crib sides and a mattress that is too small.

*

The 

TODDLER BED

 or 

DAY BED

 is not intended for children under 15 months of age or over 50 pounds 

(22.7kgs)

*

If guardrails are used as the mattress containment means, guardrail(s) provided must be used to avoid the 

formation of a gap between the mattress and the bed that could cause an entrapment (when product is 

used as a 

TODDLER BED

 or 

DAY BED

).

*

Customer Service Department No. 413

12345 Albert-Hudon Boulevard, Suite 100

Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts or 
sharp edges before assembly and frequently during use.  Securely tighten loose bolts and other fasteners.  
DO NOT use crib if any parts are missing, damaged or broken.  Contact a customer service representative 
at 1-800-295-1980 for replacement parts and instructional literature if needed. DO NOT substitute parts.

Infants can suffocate on soft bedding.  Never add a pillow or comforter.  Never place additional padding 
under an infant.

The mattress intended for use on the bed shall be a full-size crib mattress having minimum dimensions of 
51-5/8 in. (1310 mm) in length and 27-1/4 in. (690 mm) in width with a minimum thickness of 4 in. (100 mm) 
and not exceeding 6 in. (150 mm).

   WARNING

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact our customer service 
representative first!

CALL 1-800-295-1980 

You can also order parts by writing to the address listed below.  Please include the product model 
number, color and a detailed description of the part.

Montreal, Quebec

Canada, H1G 3L1

E-MAIL: [email protected]

Summary of Contents for Baby Relax DA6564


















Reviews: