Doosan P260/HP220WYM, Operation & Maintenance Manual

Page: 42 / 66

Operating & Maintenance Manual OPERATION
40 Book: 46553446 (3-15-2010) Rev A
- Center Bar Blinking Compressor is ready to start (no faults)
A Engine Model Not
Recognized Compressor will start and operate with a 1700-2300 rpm range.
C Engine ECM
Communication Failure SECU cannot communicate with engine ECM over J1939 CAN
BUSS.
H Pre-Heat Signal or Start
Signal Detected Displayed while ignition switch is in the pre-heat or start position.
E Generator Switch “ON” Switch must be turned off to start the machine.
1 High A/E Temp SHUTDOWN condition due to high airend discharge temperature
(248°F/120°C).
2 High Separator Temp SHUTDOWN condition due to high separator tank temperature
(248°F/120°C).
3 Low Battery Voltage ALERT condition indicating battery or charging system needs service.
(<11.6 VDC).
4 High Eng Temp SHUTDOWN condition due to high engine coolant temperature
(248°F/120°C).
5 Low Eng Oil Press SHUTDOWN condition due to low engine oil pressure. (12 psi/0.83
bar).
6 Comp Sensor SHUTDOWN condition due to PS1 pressure sensor failure. Machine
will not start.
7 Low Eng Speed SHUTDOWN condition due to low engine speed. (Idle speed <200
rpm).
8 Low Fuel SHUTDOWN condition due to low fuel level. (Optional)
9 High Air Filter Press ALERT condition indicating engine/compressor air inlet filters need
service (20 in. of H
2
0/508 mm of H
2
0). (Optional)