32
|
BUCKET FUNCTION – RETURN TO
DIG
RECOMMENDATION FOR USE
•
Before using the bucket, check whether the proximity sensor position on the
tilt cylinder needs to be adjusted (this is not necessary with EMCV)�
When the bucket is in dump position, simply push the joystick to the maximum to
the left, and the bucket returns to the horizontal position�
You can adjust this ‘return to dig’ position by modifying the sensor (4) position on
the tilt cylinder�
For machines configured with EMCV (electro hydraulic control), the automatic ‘return
to dig’ function can be set with a sensor, which allows you to set the attack angle
from the cab� Place the bucket in the position desired, then press the touch for 3
seconds (a short signal sounds)� The bucket angle has been recorded�
Auto return disable
Auto return
enable
Summary of Contents for DL550-5
Page 59: ...59 NOTES...
