| 31
LIFT ARM POSITIONS MEMORY
AUTOMATIC STOP & FLOAT POSITION
The operator can set 2 exact positions of the lift arm (high & low) – for example,
when the machine must discharge repeatedly at the same height�
Procedure
•
High position: Raise the lift arm to the required height�
Æ
Press the button for 3 seconds (a short signal sounds)� The high position of
the linkage is saved�
•
Low position: Down the lift arm at the required height�
Æ
Press the button for 3 seconds (a short signal sounds)� The low position of
the linkage is saved�
•
When the joystick/finger-tip is pulled/pushed to the maximum, a solenoid keeps
the joystick/finger-tip in the position and the lift arm rises up/down to the set
position�
When the automatic stop function is activated� Pushing the joystick/finger-tip
forward to the maximum de-pressurizes the hydraulic system and only the bucket’s
weight exerts pressure on the ground� This is the
float position
(this function makes
levelling easy)�
RECOMMENDATION FOR USE
•
After settings, don’t forget to check your choices and activate the automatic
stop function if you want to use them!
Auto stop disable
Auto stop
enable
Summary of Contents for DL550-5
Page 59: ...59 NOTES...
