Doosan DL220, Operation And Maintenance Manual

Page: 121 / 250

OP001013
2-59
Operating Controls
Fusible Link
A fusible link (Figure 118) is in the battery box.
If the engine does not crank, first check that the starter switch is
turned "ON" and that no power is available (No indicator lights
will light.). Check that the "A" portion (Figure 119) of the fusible
link is not broken or burned through. Replace the fusible link if
damage and investigate cause.
Engine Emergency Stop Switch
If the engine does not shut down when using the starter switch, it
can be stopped by moving the engine emergency stop switch to
the "I" (Emergency Stop) position.
O. In this position, the engine emergency stop system is
"OFF"
I. In this position, "Emergency Stop" is selected the engine
will shut down
NOTE: When released, the switch will return to "O"
(OFF) position
FG003978
Figure 118
HAOB100L
A
Figure 119
WARNING
When changing the fusible link, replace the fusible link with
the same capacity part. Otherwise, a fire could break out in
the wiring harness and/or other components of the circuit.
Always use original
DOOSAN parts.
FG015592
Figure 120
FG015593
O
I
Figure 121