Doosan DL160, Operation And Maintenance Manual

Page: 31 / 236

OP000753
1-19
Safety
Fire Extinguisher and First Aid Kit
As a precaution if any injury or fire should occur, always do the
following.
• Be sure that fire extinguishers have been provided
and read the labels to ensure that you know now to
use them. It is recommended that an appropriately
sized (2.27 kg [5 lb] or larger) multipurpose "A/B/C"
fire extinguisher be mounted in the cabin. Check and
service the fire extinguisher at regular intervals and
make sure that all work site crew members are
adequately trained in its use.
• Provide a first aid kit in the storage compartment and
keep another at the work site. Check the kit
periodically and make any additions if necessary.
• Know what to do in case of injury from fire.
• Keep emergency numbers for doctor, ambulance
service, hospital and fire department near your
telephone.
If the machine catches fire, it may lead to serious personal injury
or death. If a fire occurs during operation, escape from the
machine as follows:
• Turn the starter switch to the "O" (OFF) position and
shut down engine.
• If there is time, use the fire extinguisher to extinguish
as much of the fire as possible.
• Use the handrails and steps to escape from the
machine.
The above is the basic method for escaping from the machine,
but changing the method may be necessary according to the
conditions, so carry out practice drills at the work site.
Protection from Falling or Flying Objects
On work sites where there is danger that falling objects or flying
objects may hit the operator's cabin select a guard to match the
operating conditions to protect the operator.
Working in mines, tunnels, deep pits or on loose or wet surfaces
could produce danger of falling rock, roll over or hazardous
flying objects. Additional protection for operator's cabin could be
required in form of a FOPS/Falling Object Protective Structure
and/or ROPS/Roll Over Protective Structure reinforcement
system.
HDO1009L
Figure 9
HAOA110L
Figure 10