OP000753
1-15
Safety
Clothing and Personal Protective Items
Contain long hair, and avoid loose clothing and jewelry. They
can catch on controls or in protruding parts and cause serious
injury or death.
Do not wear oily clothes. They are highly flammable.
Full eye protection, a hard hat, safety shoes and gloves may be
required at the work site.
While working on the machine, never use inadequate tools.
They could break or slip, causing injury, or they may not
adequately perform intended functions.
Breathing Masks, Ear Protection May Be
Required
Do not forget that some risks to your health may not be
immediately apparent. Exhaust gases and noise pollution may
not be visible, but these hazards can cause disabling or
permanent injuries.
NOTE:
The equivalent continuous A-weighted sound
pressure level at the workstation for this machine is
76 dB(A).
Measurement is obtained on a dynamic machine
following the procedures and cabin conditions as
described in ISO 6396.
NOTE:
The guaranteed sound power level emitted by the
machinery for this machine is 104 dB(A).
Measurement is obtained on a dynamic machine with
the procedures as described in 2000/14/EC.
Vibration Level Information
Hands/Arms: The weighted root mean square acceleration to
which the hands/arms are subjected, is less than 2.5 m/s
2
.
Whole body: The weighted root mean square acceleration to
which the whole body is subjected, is less than 0.5 m/s
2
.
Measurements are obtained on a representative machine, using
measuring procedures as described in the following standard:
ISO 2631/1. ISO 5349, and SAE J1166.
HAOA020L
Figure 2
Summary of Contents for DL160
