DE08TS Diesel Engines
Maintenance
Vibration damper
1.
Unscrew the vibration damper fixing bolts in
reverse sequence of installing sequence and
remove the vibration damper assembly.
Timing gear case cover
1.
Disassemble the oil seal using an oil seal remov-
ing jig.
2.
Remove the cover fixing bolts and disassemble
the cover from the timing gear case.
Oil pump
1.
Unscrew the bracket fixing bolts of the oil suction
pipe.
2.
Unscrew the pipe fixing bolts of oil pump and dis-
assemble the suction and supply oil pipe.
3.
Unscrew the oil pump fixing bolts, and disassem-
ble the oil pump.
Piston and connecting rod
1.
Remove the connecting rod cap bolts in the
reverse order of assembling but do same as the
cylinder head bolt removal.
2.
Disassemble the upper/lower of connecting rod
caps by tapping lightly with urethane hammer, and
remove the bearing.
3.
By pushing the connecting rod with wooden bar
from the direction of oil pan toward cylinder head,
disassemble the piston assembly.
4.
The disassembled piston assembly should be han-
dled to prevent bumping each other, and stored as
the cylinder’s order.
5.
In order for connecting rod cap not to be swapped,
temporarily assemble to the corresponding con-
necting rod.
EFM2026I
EAMD025I
33
