Vehicle System
Disassembly & Assembly
7
Forks
Remove & Install Forks
1.
Remove stopper bolt and washer (3).
2.
Lift fork pin (1).
3.
Use a suitable C-clamp, strap and hoist to support
the fork as shown.
4.
Slide the fork to slot (2) in the middle of the
carriage
5.
Remove the fork. The weight of the fork is
approximately 50 kg (110 lb).
6.
Repeat steps 1 through 4 for the remaining fork.
7.
Install the forks in the reverse order of removal.
8.
Put the forks in position. Lower both fork pins (1)
to lock the forks in position.
9.
Install stopper bolt and washer (3). Be careful not
to miss this step.
Backrest
Remove & Install Backrest
1.
Fasten a hoist to the backrest. Remove bolts (2)
that fasten the backrest to the carriage.
2.
Remove backrest (1). Backrest (1) weighs about
40 kg (90 lb).
3.
install backrest (1) in the reverse order of removal.
Carriage
Remove & Install Carriage
Start By:
a.
Remove stopper bolt and washer (3).
b.
Lift fork pin (1).
Tools Needed
A
Retaining Ring Pliers
1
