background image

2

DCUH-2, DCUH-3 control units operate electro-hydraulic 
dock levelers with hinged lip of DLHH/DLHHI series.
The  units  are  equipped  with  an  uncontrolled  movement 
protection system, which is activated if the dock leveler 

was halted in the event of a potential emergency or if pow-
er supply failed. 
After all the necessary connections, the unit is ready for 
operation.

1. GENERAL INFORMATION

GENERAL INFORMA

TION

Options

DCUH-2

DCUH-3

Automatic return to stored position by pressing the P button 

Supply voltage, 380-415 V / 50-60 Hz

External traffic light

Internal traffic light

Dock leveler lighting

Leveler locking when door is closed (interlock)

Door locking when leveler is open (interlock)

Connection of additional safety devices

Service indicator

Menu screen (LCD display)

Door control

Inflatable dock shelter control

Table 1.1. Control units options

Table 1.2. Control units specifications

Parameters

Value

Supply voltage

380-415 V / 50-60 Hz

Control voltage

24 VDC

Max. power of the hydraulic station

1,5 kW

Operating temperature

-20…+50 °С

Dimensions (W 

×

 H 

×

 D) 

195 

×

 355 

×

 165 mm

Protection class

IP54

 

Use the control unit only for its intended purpose, any 
other use is prohibited.

 

The manufacturer assumes no liability for damage or 
injury to persons or property which occur as a result of 
failure to observe safety rules specified herein or incor-
rect use of the control panel.

 

Only trained personnel should install, operate or service 
this equipment.

 

Correct operation of the control unit can only be guar-
anteed if the supply voltage complies with the specified 
in the instructions. 

 

Prior  to  first  actuation  of  the  control  unit,  make  sure 
that all electrical connections are securely fastened and 
insulated, safety devices are installed and ready for use. 

2. SAFETY RULES

     WARNING!
Carefully follow all the instructions specified herein. Failure to do so could cause equipment damage and/or per-
sonal injury!

Summary of Contents for DCUH-2

















Reviews: