12
OPTION 2: POWER SUPPLY AND NETWORK CONNECTION USING
POE (POWER OVER ETHERNET)
To power the device via a PoE-Switch (e.g. D-Link DGS-1008P) or PoE-
Injector (e.g. DoorBird Gigabit PoE Injector A1091), use a CAT.5 cable or
higher in accordance with the PoE standard IEEE 802.3af Mode A.
A CAT.5 cable or higher must be used for this purpose, as network signals
can only be transmitted over completely insulated, shielded and twisted
cables. If you use PoE as a source of power, the four wires for PoE then
simultaneously form the data line. The device will not start if your PoE-
Switch/PoE-Injector does not support the PoE Standard IEEE 802.3af Mode A.
Do not combine the power supply via the mains adapter with the
power supply via PoE.
1. Disconnect the PoE-Switch or PoE-Injector from the power grid.
2. Run the network cable to the installation location of the device.
For further Information to PoE see: http://www.doorbird.com/poe
OPTION 3: POWER SUPPLY USING A DIN RAIL POWER SUPPLY UNIT
Alternatively to the mains adapter, we offer a DIN rail power supply in our
online shop, which can be installed by a specialist. The network connection
is then made via a network cable or alternatively via WiFi. Please remove the
cables and wires from the sockets of the device that you do not need.
NOTICE
Summary of Contents for D301 Series
Page 36: ...www doorbird com...
