3
Donaldson Company, Inc.
Electrical installation must be performed by a qualified electrician and comply with all applicable national and local
codes.
Compressed air installation must be performed by a qualified pipe fitter.
Penetrations into the dust collector must be air and dust tight.
Location Considerations
The gateway should be installed in a convenient location that does not interfere with any safety systems or the normal operation
and maintenance of the collector. The preferred location is as high as feasible to increase the cellular signal strength.
Overview
The hardware kit received includes the gateway and other accessories required for installation; reference Replacement Parts List
for what is included in the kit. There may be situations where additional materials are needed to complete the installation. A typical
installation will involve the following steps:
1. Shut down the dust collector and isolate the compressed air supply source.
2. Install the Donaldson gateway.
3. Connect pneumatic tubing to the gateway.
4. Connect optional sensors to the gateway.
5. Attach the antenna to the gateway.
The gateway is always on, monitoring the sensors associated with the solution. If a sensor value exceeds the user-defined alert
thresholds, the gateway will communicate that data to the Donaldson iCue application for alerting purposes. Otherwise, during
normal operation the gateway communicates to the Donaldson iCue application at predefined intervals.
LEDs on the gateway indicate the status of the gateway. Reference the Troubleshooting section for definition of the LED states.
3 Operation
4 Installation
