Donaldson Company, Inc.
1
The Donaldson™ iCue™ Sensor Integrated Gateway should not be used to detect, monitor, warn, or alert personnel
to hazards, potential safety issues, or combustion risks. Users should not rely on readings from the product to provide
emergency or hazard prevention or for emergency response activities and decisions. Users remain solely responsible
for maintaining a safe work environment. All dust collection equipment and accessories should be operated and
maintained in accordance with the manufacturer’s instructions.
Many factors beyond the control of Donaldson can affect the use and performance of Donaldson products in a particular
application, including the conditions under which the product is used.
Since these factors are uniquely within the user’s knowledge and control, it is essential the user evaluate the Donaldson
products to determine whether the product is fit for the particular purpose and suitable for the user’s application.
The device is not designed or approved to be used in any Hazardous Locations. Do not install or operate device in an
area classified as hazardous.
Electrical installation must be performed by a qualified electrician.
Only qualified maintenance personnel should service this equipment.
Prior to installing or maintaining equipment, ensure all energy sources are put into a safe condition by following your
facilities approved energy-control procedures.
This system does not replace the need for any routine or required monitoring or maintenance of your dust collection
system. Donaldson does not guarantee the accuracy of any transmitted values.
1
Safety Communication
