A-3
Donaldson Company, Inc.
Installation of Continuous Liner Collar
The Continuous Liner Collar may not be preinstalled to
the collector and may need to be securely fastened to
the transition chosen for your specific application.
Remove all packaging from the continuous collar. Place
gasket on collar flange and align Liner Collar with
transition flange. Fasten the collar to hopper flange
using bolts, washers and nuts.
Tighten hardware alternately in steps.
Clean Change Liner Pack Change-Out
Procedure
Overview
The Donaldson Clean Change Liner System provides a
contained approach for the off-loading of powders from
the Donaldson Torit Dust Collector. An advantage of the
continuous liner system is being able to replace follow-
on packs without breaking powder containment for
continuous production.
The continuous liner design eliminates cross
contamination of powders. The pre-packaged 50-ft liners
reduce labor by allowing operators to continuously
process powders, instead of stopping production to
discharge the hopper.
The liner system attaches directly to the collector via the
continuous liner collar. Liner bands and clamps are used
to secure the 50-ft liner. Each 50-ft liner provides the
equivalent of ten 50 gallon (185 liter) drums in capacity. It
is up to the end-user to determine how often to discharge
and dispose of the powder.
Clean Change Liner System Components
Initial purchase of Donaldson Clean Change Solution
includes:
1 - 50-ft continuous liner pack with two integrated rubber
gaskets
1- Liner Pack Shroud
1 - Metal Band Clamp
1 - Locking Outer Clamp (with integrated rubber gasket)
1 - Crimping Tool with 100 crimp ties
1 - Cutting Tool
Initial Installation of Clean Change Liner
System
The Clean Change Liner system should be attached after
installation of the Donaldson Dust Collector and before
beginning dust collection from the process.
Note: It is recommended that the Donaldson Torit
Dust Collector be completely installed before
attaching the Clean Change Liner System.
Step by step liner instructions are provided in the
ILC Dover Document Number DOC9261 provided
separately.
Continuous Liner Collar
flange connects
to discharge outlet
shroud flange
discharge
collar
second groove
first groove
Summary of Contents for DFE 2-4
Page 42: ...A 1 Donaldson Company Inc Appendix A Clean Change Bag In Bag Out Filter and Liner System...
Page 56: ...B 2 Donaldson Company Inc Service Notes Date Service Performed Notes...
Page 57: ...Downflo Evolution DFE 2 8 to 5 80 B 3 Date Service Performed Notes...
Page 58: ...B 4 Donaldson Company Inc Date Service Performed Notes Service Notes...
