background image

Page 25

REV.  2016-01

1.  The first 5 years: 

    If, during this 5- 

year period, and in the course of a normal 
use, a component part of the fireplace 
becomes defective due to a material or 
workmanship defect, this part will be 
replaced or, at our discretion, repaired 
free of charge.  The following parts are 
excluded from this warranty:

Any fireplace modified, 

altered or containing substituted  
c o m p o n e n t s   o r   w h e n   t h e  
instructions for installation, 
operation or maintenance have not 
been followed.

1.4  Gaskets:

  Fireplace gaskets are 

8.

  The duration of the warranty on any 

warranted for  90 days  following the  part  that  is  the  object  of  a  claim  must
date of purchase.  

never exceed the total duration of the 
original warranty of the part shipped with 

2.  20-Year Replacement Plan:

  After  the fireplace.

the expiration of the first 5 years, and for 
an additional 20 years period following 

9. Draft and smoke returns:  

All Don-

the date of purchase, we will ship (at the  Bar fireplaces are designed and tested to 
exception of transport  expenses and  operate with a positive draft, without 

1.1  Hearth back plate, smoke 

parts described in the articles 1.1, 1.2,  smoke returns, when installed according 

deflector, HE deflector system, 

1.3  and 1.4) any defective part for a price 

to  the  manu fact urer 's  inst ruct ions .     

grate, ash drawer/tray, wood 

not exceeding 50% of its retail price.

Smoke returns  caused by  environmental 

basket,  fireguard, refractories, 

factors (negative pressure, lack of air, 

metal fire screen, BBQ grill,  3

.  These  warranties  shall  never  be  turbulence, etc.) are not covered by the 

electric fan blower:  

  Being subject 

interpreted as covering workmanship on  present warranty.

to high temperatures, these parts  site.  Don-Bar takes no responsibility for 
may have to be replaced from time to  damages to the building following the 

10.

 

 The warranty does not cover:

time; this is regarded as normal  repair or the replacement of any part 
maintenance.  However, all the 

          

10.1        Broken glass

covered by the warranty. 

original parts shipped with the 

10.2    Damages caused by a 

fireplace are warranted against 

chimney fire;

4.

  No representative, employee or agent 

material or workmanship defects for 

10.3  Shipping damages not 

of Don-Bar is authorized to change or 

1 year following the date of 

reported  on delivery; 

extend the present warranty.

purchase. 

10.4        Faulty installation;
10.5  Damages caused by 

5.

 The warranty is valid only if the 

1.2   Chimney:

  Since the chimney 

abnormal or abusive use.

installation, the operation, and the 

and its components are not 

10.6     

maintenance of the fireplace have been 

manufactured by Don-Bar, please  done in accordance with the fireplace 
refer to the warranty of the chimney  manufacturer written instructions.
manufacturer for any claim  about it.

6.

 Don-Bar takes no responsibility for any 

1.3  Fireplace paint finish:

 The  damage to the fireplace, the chimney or 

fireplace is painted with a high  the building if fireplace repairs done by 
temperature paint that needs to be 

11. Caution: 

Improper operation or lack 

third parties are executed with non 

freshen up from time to time.  

of maintenance can endanger your 

original  parts.  

However, the original finish applied 

safety.

to the  fireplace is warranted for 1 

7.

 Any part that is the object of a claim in 

year following the date of purchase.  

12. Send any communication or claim to 

accordance with the present warranty 

The warranty is limited to the supply 

the following address: 

must by returned to the shop (transport 

of the paint required for repainting  prepaid) with a proof of purchase. All 
the fireplace.

Foyers Don-Bar Fireplaces, inc.

returns must be approved by the 

741, St-Vallier Ouest, Québec,

manufacturer before shipping. 

(Quebec) Canada G6V 3N9
Phone: 418-686-9114
Fax:  418-686-9117
Website:  www.don-bar.com
Email:  [email protected]

        25 YEAR LIMITED WARRANTY                   

LES FOYERS

FIREPLACES

DON-BAR

Summary of Contents for ZERO CLEARANCE ZC Series



























Reviews: