18
E N G L I S H
WARNING you must get off the elliptical bike to adjust the level of the product.
Au sol, placez vous face à l’avant de votre produit, tenez le guidon et tirez vers vous votre vélo. Votre produit est alors en appui sur ses
roulettes de déplacement, vous pouvez le déplacer. Lorsque le déplacement est terminé, accompagnez le retour des pieds arrières sur le sol.
MOVING THE PRODUCT
2
LEVELLING THE BICYCLE
WARNING: you must get off the elliptical bike to adjust the level of the
product.
In the event that the bike becomes unstable during use, turn one or both of the level
adjusters until the bike is stable.
ADJUSTING THE RESISTANCE
According to the EN (European Norm) definition, this product is an item of “pedal crank
training equipment”. You can adjust the braking torque not only with your pedalling
speed but also by manually choosing your resistance level (by turning the torque control
knob on non-motorised products and by pressing the +/- buttons on motorised products).
However, if you retain the same level of resistance, the braking torque will increase/
decrease as your pedalling speed increases and decreases.
1
2
ADJUSTMENTS
CONSOLE FC 100
1. Displaying pedalling speed.
2. Alternating display of the DISTANCE covered and
DURATION of the workout.
The item of information displayed alternates every
10 seconds.
3. Displaying CALORIES expended.
4. HEART RATE indicator.
5. Digital HEART RATE display.
RESETTING THE PRODUCT:
The product goes to standby mode after ten minutes
of inactivity.
The indicators are reset to 0 when the product goes
into standby mode (the data is not saved).
This console is fully automatic and turns on as soon as you start pedalling.
DISPLAY
AUTOMATIC CONSOLE
DIS connections
1
