19
6. RECEIVER
The receiver communicates with the transmitter via RF. It mounts near heating device
and is linked to it with electrical connections. Electrical connections will be made by
authorized personnel. Before connection check that the command of the terminals is
NOT 220V!
Receiver – Boiler connection.
1. There are 4 wires from receivers: wires from receiver labelled “OT” are to be
connected with boilers with electronic control. Wires labelled “ON/OFF” are to be
connected with analogical boilers.
2. Use black magnetic pad or the screws to fix the receiver to a proper place.
OT
ON/OFF
