background image

INSTALLATION MANUAL

EN

WARRANTY

- The warranty on the device is valid only if powered by a power 
supply provided by DOMUS Line. The warranty's general terms 
and conditions for this device are available at 

www.domusline.com

support, applying light pressure until it is completely fitted as 
illustrated in figure 5.
- If necessary, bore a ø ≥ 8mm exit hole for the power supply 
cable as illustrated in figure 6.

CONNECTING THE DEVICE TO THE POWER SUPPLY 

 

- Connect the device power cable to an appropriate (check plate 
data printed on the product label) safe power supply with 
stabilised voltage (not included) with power 10% higher than the 
total load.
- If more than one device must be connected to the power 
supply ensure that the total sum of the power absorbed by the 
devices (check the plate data shown on the product label) does 
not exceed the maximum power permitted by the Converter.
- DOMUS Line guarantees the product only if powered with a 
Converter supplied by us.

WARNING

The Led MODULE, the power supply cable or any switch used, 
are not replaceable, therefore in case of damage the device 
must be entirely substituted.

Summary of Contents for ATOM OB















Reviews: