![background image](http://html1.mh-extra.com/html/domo/do327l/do327l_instruction-booklet_2519854041.webp)
DO327L
41
www.domo-elektro.be
• Dry setting: for dry bags or substances without moisture, which have a shorter
closing time.
• Wet setting: for wet bags or substances with more moisture, which have a
longer closing time.
The standard setting is for dry bags and a normal closing time.
MAKING BAGS WITH THE FILM ROLL
The film roll allows you to make bags yourself according to the size of the food that
you want to package.
1. Measure the length of the bag needed to package the food. Take the length of
the food, add 8 cm and possibly another 2 cm extra if you want to use the bag
again later. If you want to re-use the bag more than 1 time, add 2 cm for each
time that you want to re-use the bag.
2.
Unroll the film to the desired length and cut it off with a sharp pair of scissors.
3.
Make sure that the film is clean and has no folds in it.
4.
Place one open end of the film on the heating strip.
5.
PLEASE NOTE: Do not allow the film to get into the vacuum chamber.
6. Close the lid on both sides so that it clicks shut. The lid is now closed.
7. Press the
SEAL
button
to switch on the machine and to seal the film at one
end. Press the unlock buttons to remove the bag from the machine. Check the
seal. The bag is now ready to be used.
USING THE MACHINE
Always clean the machine before using it. Read the instructions in the section on
maintenance and cleaning.
Place the machine on a smooth and stable surface. Allow for sufficient working
room around the machine.
PACKING DRY PRODUCTS
1. Place the plug in the socket, and the blue indicator light above
“dry” will light up.
2. Place the food you want to store in the bag. Make sure that the
bag is at least 8 cm longer than the food you want to store.
3.
Open the lid.
4. Place the open end of the bag in the vacuum chamber. Make
sure that the end of the bag that rests of the sealing strip is
completely clean and free of food particles. The bag must be
kept tight, without any folds.
5. With a hand on each side of the lid, press down until you hear a
click and the lid is locked.
6.
Press on the VACUUM & SEAL button to start the machine.
The machine will now automatically vacuum seal. First the
light above “vacuum & seal” will light up. Then the light above
<<CLICK>>
<<CLICK>>