Owner Installation Instructions
Dominator
®
7
Auto courtesy light
The GDO-7v2 courtesy light comes on automatically whenever the door is activated. The light can also be
switched on and off without operating the door by coding a dedicated button on a TrioCode™ transmitter.
The light will stay on for approximately three minutes then switch off. This time is adjustable.
Vacation mode
A hand held transmitter can be programmed to lock and unlock all other transmitters that have been
programmed into the openers’ memory. The vacation mode can be used when the door is left idle for long
periods of time.
Pet/Pedestrian mode
The hand held transmitter can be programmed to open the door partially so that the family pet can enter and
exit the garage at any time. You may also wish to open the door to a height suitable only for pedestrian access.
The door opening position is also programmable.
Auto-close mode
The opener can be programmed to automatically close after an open cycle. The auto-close time is adjustable.
It is compulsory to install a P.E. Beam if this mode is selected, otherwise the door may cause personal injury
or damage to property.
Photo Electric (P.E.) Beam (optional)
The opener has an input for a P.E. Beam to be connected for extra safety protection and use of the auto-close
mode. We highly recommend that a Photo Electric Beam (P.E. Beam) be installed.
Manual operation
The opener is equipped with a unique manual disengaging device. If the power to the opener is disrupted for
any reason the door can be put into manual mode by pulling down on the string handle on an angle towards
the door. This will allow you to manually open or close the door. To re-engage the opener pull the string
handle away from the door.
