EN
Safety instructions
TL, FO
14
!
CAUTION! Failure to obey these cautions could result in minor or
moderate injury.
Electrocution hazard
•
Before starting the cooling device, ensure that the power supply line
and the plug are dry.
•
Disconnect the cooling device from the power supply
–
before each cleaning and maintenance
–
after every use
Health hazard
•
Please check if the cooling capacity of the device is suitable for storing
the food or medicine you wish to cool.
•
Food may only be stored in its original packaging or in suitable
containers.
•
Opening the cooling device for long periods can cause significant
increase of the temperature in the compartments of the device.
•
Clean regularly surfaces that can come in contact with food and
accessible drainage systems.
•
If the device is left empty for long periods:
–
Switch off the device.
–
Defrost the device.
–
Clean and dry the device.
–
Leave the lid open to prevent mould developing within the device.
A
NOTICE! Damage hazard
•
Check that the voltage specification on the type plate corresponds to
that of the energy supply.
•
Only connect the cooling device as follows:
–
With the DC connection cable to a DC power supply in the vehicle
–
Or with the AC connection cable to an AC power supply
•
Never pull the plug out of the socket by the cable.
•
If the cooling device is connected to a DC outlet: Disconnect the
cooling device and other power consuming devices from the battery
before connecting a quick charging device.
•
If the cooling device is connected to a DC outlet: Disconnect the
cooling device or switch it off when you turn off the engine. Otherwise
you may discharge the battery.
•
The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
TL200-450-600-FO200-450-600-800-1000_OPM_4445102370_EMEA16_202x-xx-xx.book Seite 14 Sonntag, 21. März 2021 1:13 13