Dometic TEC60, Installation Manual

Page: 33 / 220

EN
TEC60 Installation
33
9.4 Installing the tank and fuel supply line
Please observe the following instructions for the installation location:

The tank bottom must be positioned at a maximum of 0.3 m below the bot-
tom of the generator.
 The top of the tank must not be higher than the top of the generator oth-
erwise the fuel will not be able to feed in.
➤
Lay the fuel line as straight as possible.
➤
Secure the tank, see fig. c , page 6 and chapter “Connecting the float” on
page 37.
9.5 Mounting the inverter
Please observe the following instructions for the installation location:
 Observe the length of the extension cable from the inverter to the gener-
ator.
➤
Drill the holes as shown in fig. d , page 6.
➤
Screw on the inverter.
9.6 Mounting the control panel
Please observe the following instructions for the installation location:
 Observe the length of the extension cable from the control panel to the
generator.
➤
Drill the holes as shown in fig. e , page 7.
➤
Insert the plug into the control panel.
➤
Screw on the control panel.