EN
RUC8408X
Installing the refrigerator
13
•
Fit an air deflection plate (fig.
4
4, page 12) above the compressor so that the
heat does not accumulate in the vehicle.
Installation with one lower rear vent and one roof vent
I
NOTE
This installation method is satisfactory for refrigerator performance, but
not the preferred method due to lack of service access to the compres-
sor shelf area.
Pos. in
fig.
4
,
page 12
Description
1
Maximum height is equal to 100 mm below the compressor shelf
2
LS300 vent
3
Roof vent
≥
100 mm
1
2
3
5
RUC8408X--IO-AU.book Seite 13 Freitag, 22. Dezember 2017 8:21 20
