Dometic Rollerblind Precision BR38, Installation And Operating Manual

Page: 6 / 132

EN
Technical description Rollerblind Precision
6
5 Technical description
Blinds are available in three mounting types in different sizes:
• BR : Bracket mounted (available in size BR38)
• MP : Mounting profile mounted (available in size MP38)
• CA : Cassette mounted (available in sizes C1 and C2)
There are three different types of fabric restraints:
• FH : Free hanging
• GW : Guide wired (available as Dome ( A ), Flush Mount ( B ) and Extended ( C ), see
GW versions in fig.
1
)
• ST : Side tracked (available with ST7 , ST8 , ST10 and ST11 , see ST versions in
fig.
1
)
The number on the product label indicating the blind type is located:
• For BR versions on the tube under the fabric
• For MP versions on the back of the mounting profile
• For CA versions on the back of the cassette
6 Installation
6.1 Fitting the blind
A
➤
Proceed as shown:
–
BR leaflet: fig.
2
to fig.
4
– MP leaflet: fig.
2
to fig.
3
– CA leaflet: fig.
2
to fig.
3
➤
Proceed as shown to remove the blinds:
–
BR leaflet: fig.
5
– MP leaflet: fig.
4
– CA leaflet: fig.
4
NOTICE! Risk of damage
Consider using two people to install the product if the blind is large or
the installation location is difficult to reach alone.
RollerblindPrecision-IOM.book Seite 6 Montag, 25. November 2019 10:29 10