17
Refrigerator operation
Fig. 9
To start the refrigerator, press button
(1)
for
2
seconds
.
The refrigerator starts with the last selected
type of energy.
120V operation :
Press button
(2)
:
12V operation :
Press button
(4)
:
1
2
4
4.6.1 Electrical operation
3
Fig. 10
3
Gas operation :
Press button
(3)
:
The ignition process is activated automatical-
ly by means of an automatic igniter.
The flame extinguishes after reaching the pre-
set cooling compartment temperature and
ignites again if the cooling compartment tem-
perature increases again. If the flame is not lit
after the first ignition attempt, the automatic
igniter repeats the ignition twice (duration 30 s)
at time intervals of 2 minutes. If the flame is
not lit afterwards, a fault is indicated.
4.6.2 Gas operation
Fig. 11
7
4.6.3 Setting of cooling compartment
temperature
8
MES-appliances (manual energy selection)
4.6
RMD 85x1 models
To start the refrigerator, press button
(1)
for
2
seconds
.
The refrigerator starts with the last selected
type of energy.
230V operation :
Press button
(2)
:
12V operation :
Press button
(4)
:
Gas operation :
Press button
(3)
:
Fig. 12
Select the desired cooling compartment tem-
perature by pressing button
(7)
.
The LED display
(8)
of the selected temperatu-
re setting is illuminated.
The scale starts with
MIN position
at the left
LED position (small bar = highest temperature)
and climbs up to
MAX position
at the right
LED position (large bar = lowest temperature).
Note: The temperature levels do not relate to
absolute temperature values.
4.7.1 Manual operation
AES appliances
( automatic energy selection)
4.7
RMD 85x5 models
1
2
4
3
i
1
Summary of Contents for RMD 8501
Page 57: ...www dometic com...
