CHANGING DOOR SWING TO OPPOSITE
PANEL DIMENSIONS
SIDE
A special Hinge Kit must be used to change door swing.
For further information please contact The
listed on the front page.
INSTRUCTIONS FOR MOUNTING THE
DOOR PANEL
The refrigerator is normally delivered without door panel.
The lower decoration strip and parts bag are taped in-
side the door.
MAX. THICKNESS
(4 mm)
HEIGHT
W I D T H
TYPE
M I N .
M I N .
2352
mm
498
Before starting the mounting work, check that the panel
dimensions are in compliance with those given in the
Table and the instructions are read thoroughly.
We recommend to mount the panel on the door before
the refrigerator is installed in the enclosure.
When mounting the panel, proceed as follows:
Slide the panel from the bottom of the door into the
grooves on the vertical edges of the door.
Push the panel upwards, take the
plastic panel
stops from the parts bag and put them in the
holes at the lower door frame.
Put the decoration strip across the door and fasten
it with three
from the parts bag.
CERTIFIED VENT SYSTEM KITS
REFRIGERATOR
KIT
MODEL
NO.
COMPONENTS
PART NO.
R M 2 3 5 2
2A
R o o f B a s e
R M 2 3 5 3
R o o f C o v e r
Lower Side Vent
Lower Side Vent
R M 1 8 3
3A
Upper Side Vent
R M 1 2 3
Upper Side Vent
Lower Side Vent
R M 1 8 3
P o w e r V e n t A s m .
Upper Side Vent
R M 1 2 3
Upper Side Vent
Upper Side Vent
3107560.041
Lower Side Vent
R M 1 6 3
Lower Side Vent
3107560.009
Fill in “XXX” with color code numbers. For color codes, contact your supplier.
Alternate instructions forwarded with the Ventilator Kit.
further information contact your dealer or distributor.
