20
(Figure 59, 60)
- Mark fastening position of heating cartridge on boiler with a permanent felt-
tip pen (in order to facilitate subsequent reassembly)
(Figure 61)
- Remove fastening spring of heating cartridge.
(Figure 62)
- Twist heating cartridge in the direction of the back panel.
(Figure 63)
- Remove the clamp from the heating cartridge with 2 combination pliers.
(Figure 64)
- Restore clamps on the new heating cartridge up to the middle (45 mm
from upper edge), and level upper edge of heating cartridge with the pen
sign showing the position. By applying strength, press the clamp and apply
the heating cartridge to the boiler.
(Figure 65)
Figure 59
Figure 60
Figure 61
Figure 62
Figure 63
Figure 64
Figure 65
