Technical description
PerfectView
EN
10
6
Technical description
6.1
Function description
The camera is located in an aluminium case and transfers the image via a cable to a monitor. The
built-in infrared LEDs improve night vision.
The
camera
consists of the following elements:
7
General instructions for electrical connection
7.1
Laying cables
A
I
No. in
fig.
4
, page 3
Description
1
Infrared LEDs
2
Sleeve
3
6-pin connection cable
4
Plug
5
LDR sensor
NOTICE!
The cables may not be exposed for long periods to solvents such as benzene, since
they can damage the cable.
NOTE
•
As far as possible, use original ducts for laying the cables, or other suitable options
such as paneling edges, ventilation grills or dummy plugs. If no openings are avail-
able, you must drill holes for the cables. Check beforehand that there is sufficient
space on the other side for the drill head to emerge.
•
Cables and connections that are not properly installed will cause malfunctions or
damage to components. Correct installation of cables and connections ensures
lasting and trouble-free operation of the retrofitted components.
CAM301-IO-16s.book Seite 10 Dienstag, 4. September 2018 10:59 10
