EN
Installing the video system
CAM360
22
8.1
Tools required
For
installation and assembly
you will need the following tools (fig.
1
, page 3):
•
Steel drill: 6 mm and 2.4 mm (
1
)
•
Drill (
2
)
•
Allen key: 2.5 mm (
3
)
•
Measuring ruler (
4
)
•
Hammer (
5
)
•
Centre punch (
6
)
•
Crimping tool (
7
)
•
5 x measuring tape: at least 10 m
To establish and test the
electrical connection
, the following tools are required:
•
Diode test lamp (fig.
1
8, page 3) or voltmeter (fig.
1
9, page 3)
•
Insulating tape (fig.
1
10, page 3)
•
Cable bushing sleeves
To
fasten the cables
, you may need additional cable binders.
8.2
Installing the cameras
A
Finding the installation positions
A
Please note the following:
•
Make sure that the installation location of the camera is sufficiently firm (for exam-
ple, to prevent the camera from being knocked down by branches that may
brush the roof of the vehicle).
•
To obtain the best results, mount the cameras as high as possible and as close as
possible to the centre of the vehicle.
NOTICE! Risk of damage!
The system may only be permanently installed after a successful test
calibration.
NOTICE! Risk of damage!
Make sure that the camera cable is not pinched or damaged. If neces-
sary, use a 1 cm thick spacer under the camera base (fig.
a
, page 6).
CAM360-I-DE.book Seite 22 Freitag, 9. Juni 2017 6:50 18
Summary of Contents for PerfectView CAM 360 AHD
