EN
Connecting the inverter
SinePower
20
9.7
Connecting the MCR7 or MCR9 remote control
(accessory)
A
➤
Connect the remote control (accessory) to the remote port (fig.
5
12, page 4).
9.8
Connect external switch to turn device on and off
I
You can use the following as an external switch:
•
external switch, voltage supply from the inverter: fig.
8
, page 6
•
Control unit with relay or transistor circuit (TR): fig.
9
, page 6
•
external switch with voltage supply from the battery (BAT) of the vehicle: fig.
0
,
page 6
•
external switch with its own voltage supply (DC POWER) e.g. from the ignition:
fig.
a
, page 6
➤
Set the main switch (fig.
5
3, page 4) to “OFF” and make sure that the connec-
tion for the remote control (fig.
5
12, page 4) is not assigned.
➤
Set the main switch (fig.
5
3, page 4) to “REMOTE”.
➤
Connect the external on/off switch with the connection cable to the green
terminal (fig.
5
11, page 4).
NOTICE!
•
Only plug in the connection to the remote control in the remote port.
The device can be damaged by connecting it incorrectly.
•
Ensure that the remote control and inverter are supplied with the
same input voltage.
•
Follow the instruction manual of the remote control.
NOTE
Use cables with a cable cross section of 0.25 – 0.75 mm².
MSI2300-3500--IO-16s.book Seite 20 Mittwoch, 3. August 2016 5:46 17
