EN
MD 310, MD390, MD450
Troubleshooting
15
11
Troubleshooting
If you are unable to rectify the fault, get in touch with a specialist workshop.
12
Maintaining and cleaning the safe
A
➤
Occasionally clean the product with a damp cloth.
Display
Fault
Possible cause
Suggested remedy
LO-BAT
The safe lock doesn't
close.
The battery is low.
➤
Replace the batteries.
E-CODE
Three short audible
signals sound.
False code
➤
Enter the correct code.
–
False master code
➤
Enter the correct master
code.
HOLD15
Two short audible
signals sound
whenever any button is
pressed.
The safe lock is
disabled after the
wrong code has been
entered three times.
➤
Wait for 15 minutes
without pressing any
buttons. The safe lock is
no longer disabled
following this 15 minute
waiting period.
➤
Following this, enter the
correct code.
➤
Open the door
mechanically with the
master key.
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
XSafe-MB.book Seite 15 Freitag, 16. September 2016 1:53 13
