6
Securing
EA 330
The miniCool must be screwed onto the cupboard using the lower hinges.
Connecting the Device to the Electricity Supply
The device must be connected to a properly earthed socket in line with
the relevant valid country regulations.
Check prior to initial operation that the voltage
noted on the model label corresponds to the
mains voltage.
If this is not the case, do not connect the device
and contact your dealer!
If the connection cable is damaged it must be replaced by the
Customer Service at Dometic, or by respectively qualified personnel,
in order to prevent any hazards.
Attention: For GB Only !
Plug connection (for United Kingdom only)
If a 3-pin 13 amp fused plug is used, it should be fitted with a 3 amp fuse;
with other plug types, the circuit should contain a 5 amp fuse.
This appliance conforms with the requirements of EEC directive No. 82/449
relating to radio interference.
Warning - This appliance must be earthed.
IMPORTANT
The wires in the mains lead of this appliance
are coloured in accordance with the following
code:
GREEN and YELLOW
: EARTH
BLUE
: NEUTRAL
BROWN
: LIVE
As the colours of the wires in the mains lead
may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
1. Connect the GREEN and YELLOW coloured wire to the plug terminal
marked letter
E
or earth symbol or coloured green or green and yellow.
2. Connect the BROWN coloured wire to the plug terminal marked letter
L
or coloured red.
3. Connect the BLUE coloured wire to the plug terminal marked letter
N
or
coloured black.
4.6
1. Tighten screw.
2. Put on cap.
4.7
All manuals and user guides at all-guides.com
all-guides.com
