background image

2

Thank you for choosing our appliance. We are sure it will provide you with trouble-free use.
In the following, we would like to familiarise you with some symbols, which we bring to your attention to ensure

the safe and efficient operation of the appliance:

source of danger, in event of improper operation 

suggested useful tips to read

information concerning environmental protection

This refrigerator is intended for the storage of food and drinks.

Attention!

This  product  is  designed  to  be  operated  by  adults.  Children  should  not  be

allowed to tamper with the controls or play with the product.
Any electrical work required to install this appliance should be carried out by a

qualified electrician.
This product should be serviced by an authorised  Service Engineer, and only

genuine  spare parts should be used.
It is dangerous to alter the specifications or modify this product in any way.
Care  must  be  taken  to  ensure  that  the  appliance  does  not  stand  on  the

electrical supply cable.
There are working parts in this product which heat up. Always ensure that there

is adequate  ventilation as a failure to do this will result in component failure

and possible content loss. See installation instructions.
Parts which heat up should not be exposed. Wherever possible the back of the

product  should  be  close  to  a  wall    but  leaving  the  required  distance  for

ventilation as stated in the installation instructions.
Before  defrosting,  cleaning  or  maintenance  work  is  carried  out,  be  sure    to

switch off the appliance and unplug it.
DO  NOT  USE  SHARP  INSTRUMENTS  to  scrape  off  frost  or  ice.  Under  no

circumstances should solid ice be forced off the cooling fins. Solid ice should

be allowed to thaw when defrosting the appliance. See defrost instructions.
This appliance is heavy. Care should be taken when moving it.
Under no circumstances should you attempt  to repair the appliance yourself.

Repairs carried out by inexperienced persons may cause injury or more serious

malfunctioning.  Refer  to  your  local    Service  Centre  and  always  insist  on

genuine  spare parts.
In this appliance the storage of any toxic or explosive substance is forbidden!

Please  read  these  operating  instructions  carefully  before  putting  the

refrigeration unit into operation. If you later sell or dispose of it, please ensure

that the new owner receives these operating instructions.
Please  follow  the  installation  details  below  carefully  Guarantee  is  valid  for

products installed as described only. (See chapter 4.1)

Summary of Contents for EA 3080













Reviews: