Dometic CRX0065D, Installation And Operating Manual

Page: 18 / 380

EN
Installing and connecting the refrigerator CRX
18
7.4 Installing the refrigerator
Proceed as follows to install the refrigerator:
➤
If you wish to drain the condensate through a hose:
Mount the outlet port (see chapter “Mounting the outlet port (optional)” on
page 17)
➤
Undo the transport lock (chapter “Releasing the lock” on page 24).
➤
Open the refrigerator drawer.
➤
Remove the blanking plugs (fig.
6
, page 5).
➤
Push the refrigerator into the recess.
➤
Fix the refrigerator in place using suitable screws (fig.
6
, page 5).
➤
Press the blanking plugs (fig.
6
, page 5) into the openings.
7.5 Connecting the refrigerator to DC voltage
A
The refrigerator can be operated with a 12 V or a 24 V DC voltage supply.
For safety reasons, the refrigerator is equipped with an electronic system to prevent
the polarity being reversed. This protects the refrigerator against reversed polarity
when connecting to a battery and against short circuiting.
To protect the battery, the refrigerator switches off automatically if the voltage is
insufficient (see table below).
NOTICE!
‡
To avoid voltage drops and loss of performance, keep the
connection cable as short as possible and not be interrupted.
Therefore avoid additional switches, plugs or power strips.
‡
Disconnect the cooling device and other electric consumers from
the battery before you connect the battery to a quick charging
device. Overvoltage can damage the electronics of the device.
12 V 24 V
Cut-off voltage
10.4 V 22.8 V
Cut-in voltage
11.7 V 24.2 V
&5;',2VERRN6HLWH0RQWDJ)HEUXDU