EN
CPB101
Using the device
17
Igniting the device
!
I
➤
Proceed as follows: fig.
➤
If the burner does not ignite after 3 attempts, turn off the gas and wait 10 seconds
for the gas to clear.
➤
Try again with the piezo igniter or light the device manually using a long match or
long neck lighter (fig.
, page 8). Do not use a cigarette lighter.
➤
After lighting, check that the burner has properly ignited. The flames must be
burning along the whole length of both sides of the burner pipe.
WARNING! Beware of injury
•
Only use the device when you or another person can attend to it.
•
Before igniting the BBQ ensure that there is no grease build up on
the hotplate or in the grease tray as this may lead to unexpected flare
ups.
•
Ignite the burners
as soon as
you have turned on the gas supply.
Otherwise gas can accumulate in the burner area and cause an
explosion.
NOTE
•
While it is operating, you will be able to hear a slight noise caused by
the gas flowing out. This is completely normal.
•
Smoke can occur when using it for the first time. This is caused by
burning deposits of machine oil and stops after approx. 10 minutes.
DometicCPB101_IOM_4445103029_APAC(en).book Seite 17 Mittwoch, 20. Mai 2020 9:17 21
Summary of Contents for CPB101
Page 4: ...CPB101 4 1 2 3 DometicCPB101_IOM_4445103029_APAC en book Seite 4 Mittwoch 20 Mai 2020 9 17 21...
Page 5: ...CPB101 5 4 DometicCPB101_IOM_4445103029_APAC en book Seite 5 Mittwoch 20 Mai 2020 9 17 21...
Page 23: ...DometicCPB101_IOM_4445103029_APAC en book Seite 23 Mittwoch 20 Mai 2020 9 17 21...
