4
A. Remove Old Refrigerator
Remove old refrigerator from enclosure.
See Installation Instructions (included with
refrigerator) for appropriate procedure.
B. Replace Mounting Rails
1.
Do
NOT
allow cosmetic features
/ surfaces of product to contact floor or other
hard surface. Otherwise, abrasion or other dam-
age could occur.
Place new refrigerator face down to access
mounting rail (at bottom).
Use padding to protect refrigerator doors
from abrasion, and boards to space refrig-
erator handles above floor (if applicable).
2. Remove screws securing mounting rail to refrig-
erator. Save for reinstallation later. See (FIG. 1).
FIG. 1
Back
Mounting Rail
Short Screw
3. Discard old (short) mounting rail. See (FIG. 1).
4. Place new (tall) mounting rail against bottom of
refrigerator, and align its mounting holes to the
tapped holes in refrigerator. See (FIG. 2).
FIG. 2
Mounting Rail
Front
Long Screw
5. Reinstall screws to secure mounting rail to re-
frigerator. See (FIG. 1) & (FIG. 2).
Short screw near back of refrigerator, and
long screw near front.
6. Repeat steps (2) through (5) for other mounting
rail.
PREPARE REFRIGERATOR
INSTALL REFRIGERATOR
Make sure refrigerator enclosure is prepared correctly
before installing refrigerator.
See Installation Instructions (included with refrigera-
tor) for enclosure requirements.
Enclosure size should match requirements for the
RM2820 refrigerator.
A. Place And Secure Refrigerator
1.
Verify electrical outlet (inside enclosure) will not
interfere with refrigerator installation.
If outlet location interferes, move / reroute
wiring to appropriate location in compli-
ance with all applicable codes.
2. Carefully place and secure refrigerator to enclo-
sure.
Verify there are no exposed openings / gaps
along top and sides where refrigerator frame
seals against enclosure.
See Installation Instructions (included with
refrigerator) for complete instructions.
Exceptions to normal instructions:
● Use 3″ long mounting screws (customer
supplied) through (tall) mounting rail. See
●
Discard old (short) base cover (included
with refrigerator). Use new (tall) base
cover (provided with kit) instead. See
