EN
Installing the device
CK500
14
6.2
Preparing the air outlet guide
Installing the air outlet adapter
➤
Remove the air outlet connection cover (fig.
5
A, page 4).
➤
Install the air outlet adapter (fig.
5
B, page 4).
Preparing the wall-mounted cupboard
➤
Mark the middle of the hole for the air outlet hose on the wall-mounted cupboard
(fig.
6
, page 5).
➤
Drill a hole in the bottom of the wall-mounted cupboard with a diameter of
75 – 80 mm.
Preparing the roof outlet
A hole must be made in a suitable place in the roof for the air outlet hose with a
diameter of 110 mm (fig.
4
, page 4).
Proceed in the following way so that the roof does not come out:
➤
Firstly, using a small drill from the inside (diameter 3 – 5 mm) drill a hole through
the roof.
➤
Drill the hole from above with a diameter of 110 mm up to 2/3 of the roof
thickness.
➤
Drill all the way through the roof from below.
CK500-IO-16s-.book Seite 14 Donnerstag, 1. Dezember 2016 11:22 11
Summary of Contents for CK500
