Dometic 9103533018, Operating Manual

Page: 17 / 236

EN
VacuSealer VS1000 Troubleshooting
17
12 V
g
opera-
tion
The device is not
being supplied with
voltage. The device is
not connected
to the 12 V
power supply
properly. Connect the device to the
12 V power supply cor-
rectly.
The device does
not work. Only use the cable
included in the scope of
supply.
Operation is
delayed compared
to when using with
230 V
w
.
– Switch on the vehicle igni-
tion before you use the
device.
Delayed operation is nor-
mal.
The fuse of the
12 V plug has
blown. Check the 12 V
connection
cable. The 12 V
connection
cable is
equipped with a
fuse inside. Only use the cable
included in the scope of
supply.
The device vac-
uum-packs but
doesn't seal. The 12 V volt-
age supply may
vary depending
on the state of
the battery. Switch on the vehicle igni-
tion before you use the
device.
Several con-
sumer units are
connected to
the 12 V con-
nection. Only connect one con-
sumer unit to the 12 V con-
nection.
Operation Problem Possible cause Remedy