8
5.
ERROR CODES
Functioning normally:
The LED associated to the output channel is lit continually when activated, and off when it is inactive. In case
of malfunction, the table below gives a series of error codes.
STATUS
Problem
Possible Causes
The LEDs 1 to 4 lights up in
sequence.
Impossible to control the
lights.
Verify the connections to the bus RS485 (connection
between the DML-004-003 and the master module)
LEDs 1, 2, 3 or 4 blink
(simultaneously) every
second.
Overheating of the channels:
the thermal protection was
activated.
- The connected element is too powerful.
- The surrounding temperature is too high.
- The selected dimming mode is not appropriate.
LEDs 1, 2, 3 or 4 blink
rapidly (2 times/ second).
Short-circuit or overload.
- The output is in short-circuit.
- The connected element is much too powerful.
- The connected element is not configured correctly
(See the configuration for the « Dimming mode »
THE LEDs function
normally.
The lights will not turn on.
- Verify the connections of the lights.
- The outputs are not programmed in mode relay (C
+ E) (in the case of a master module DMC-012-002).
6.
TECHNICAL CHARACTERISTICS
Functional characteristics
LED dimmable 230V : 3W à 150W
Incandescent and Halogen 230V : 5 W à 250 W
Halogen Very Low Voltage lamps via electromagnetic transformer : 20VA à 250 VA
The transformer should not be used at less than 75% of its capacity.
Halogen Very Low Voltage lamps via electromagnetic transformer : 25VA à 250 VA
We have to take into account the performance of the transformers to calculate the maximum number
of lights.
Electrical Characteristics
Power supply : 230 VAC / 50Hz
Consumption free of polarity: 2,60 W
Non-replaceable internal fuse
Temperature range
Stocking : -30°C à + 65°C
Fonctioning : -10°C à +45°C
CE marking
:
This product complies with all applicable directives. The EU Declaration of Conformity is
available on www.domestia.be
7.
WARRANTIES
The basic duration of your product’s warranty is 2 years from the receipt of your order. Whatever the problem
you have with your product, keep carefully your invoice bearing the serial number(s), because it is the only
document acting as a guarantee.
Excluded from this warranty are the following cases:
Damage caused by inappropriate use, improper use, poor maintenance or failure to respect the
instructions given by the manufacturer in this user manual.
Repair attempts made by the customer or a third party which are not permitted
Damage caused by accident, force majeure or other causes for which Domestia cannot be held
responsible
Fault not affecting the proper functioning or proper use of the equipment.
Domestia
176, rue Jean-Jaurès
4430 Ans
Tél : 04/ 372 07 16
Fax : 04/ 372 07 19
[email protected]
www.domestia.be
Summary of Contents for DML-004-003
Page 1: ...1...
