Domestia DML-004-003, User Manual

Page: 4 / 8

4
3. CONFIGURATION
3.1 Addressing from the application “Domestia
Home Manager” (via the master module)
When the module is connected to the master module of the type DMC-
008-001 (from the firmware V1.28), DMC-012-003 or DME-LAN-002 (from the
firmware V3.0) module DML-004-003 can be addressed from our
programmation app. « Domestia Home Manager ».
1) Automatical addressing: Click on « Add automatically », it scans the
RS485 bus and recognizes the connected modules. Then it is still
possible to modify the module’s address thanks to the arrows
« up »
and « down ».
2) Half-automatical addressing: click on “Add half-automatically» then
press the addressing button
of the module(s) DML-004-003 to add.
Click again on «Add half-automatically» to end the process of
adding modules.
3.2 Manual addressing
To make the DML-004-003 compatible with the older master modules
(DMC012-002, DME-LAN-001) the module can be addressed via the
addressing button.
1) Press during 4 seconds on the addressing button (till the blue LED
goes off)
2) Then press as many times as the wished address requires (see
addressing table
). The LED indicator lights up at each press. (max.
delay of 2 seconds between the successive pushes)
3) After a delay of 2 seconds following the last press the blue LED
flashes the number of times that the button has been pushed to
confirm the address.
Table d’adressage
Adresse du
module
Plage des
sorties
1 13-16
2 17-20
3 21-24
4 25-28
5 29-32
6 33-36
7 37-40
8 41-44
9 45-48
10 49-52
11 53-56
12 57-60
13 61-64
14 65-68
15 69-72
16 73-76
17 77-80
18 81-84
19 85-88
20 89-92
21 93-96
22 97-100
23 101-104
24 105-108
25 109-112
26 113-116
27 117-120
28 121-124
29 125-128
30 129-132
31 133-136
32 137-140
33 141-144
34 145-148
35 149-152
36 153-156
37 157-160
38 161-164
39 165-168
40 169-172
41 173-176
42 177-180
43 181-184
44 185-188
45 189-192