Page 7
Extender Advanced User Manual
Inclusion & Exclusion
Resetting the
Extender
If needed, the
Extender can be reset locally by following these steps.
Only
do this if your Z-Wave controller is missing or otherwise unreachable.
Beware that resetting your device will disconnect it from the system:
1.
Make sure that your Extender is powered on.
2.
Press the button 6 times quickly, then immediately press and hold for 10
seconds.
The Extender’s memory will be erased to factory settings and
the LED
Ring will blink very quickly six times and then blink once every half second
until it is included in a system.