manualshive.com logo in svg

Dome DMEX1, User Manual, Page: 3 / 14

Share
Download
Dome DMEX1 User Manual Download Page 3

Page 3

Extender Advanced User Manual

Table of Contents

Table of Contents

Preface ........................................................................................................2
Description & Features ................................................................................4
Specifications ..............................................................................................5
Physical Characteristics ..............................................................................6
Inclusion & Exclusion ...................................................................................7
Physical Installation ....................................................................................9
LED Behavior .............................................................................................10
Button Behavior .........................................................................................11
Compatible Command Classes..................................................................12
“Configuration” Command Class Parameters ............................................13
Troubleshooting ........................................................................................14
Warranty & Support....................................................................................15

Summary of Contents for DMEX1















Reviews:

No comments