Dolphin pro HD+ 24V100A, Technical Manual

Page: 6 / 15

NOT-DOLPROHD-00 NOT-DOLPROHD-00
CONNECTIONS
Identification Functions
L AC mains power phase, max.
10mm² (wire colour code: brown or
black)
N AC mains power neutral, max.
10mm² (wire colour code: blue,
white or red)
AC mains power earth, max.
10mm² (wire colour code: green/
yellow or green)
-DC Battery negative (common), pin M8
(wire colour code: black)
+DC1 Main battery positive, pin M8 (wire
colour code: red)
+DC2 Auxiliary 2 battery positive, pin M8
(wire colour code: red)
+DC3 Auxiliary 3 battery positive, pin M8
(wire colour code: red)
CHARGE
SELECT Curve and battery charge mode
selector, 10 positions (0 to 9)
BATTERY FUSES Battery protection fuses (on the
–DC supply)
EXT TOUCH CAN bus for TOUCH screen con-
nection
EXT COM1
& COM2 CAN bus for network operation
ID SELECT Configuration charger ID (network
operation)
TEMP SENSOR Battery temperature sensor
(2 wires no polarity, no direction)
RELAY Alarm dry contact
CONNECTIONS
AC CABLES AND CIRCUIT BREAKER
AC wiring
Check that cables are properly connected and
that the connections are tight.
For the mains power supply, it is preferable to use
an industrial cable, type HO7RNF. Observe the
recommendations below.
AC circuit breaker
The AC mains power line must have an on/
off switch with integral differential protection,
to protect persons, notably in cases of electric
shock.
Circuit breaker sensitivity must be 30mA. The
circuit breaker current rating must correspond to
the charger consumption. For this, observe the
recommendations below.
Nota : The charger has an internal protection fuse
on access L, which notably protects against a
general fault on the electronics board. As the fault
concerned is permanent, this fuse is not accessible for
maintenance.
Charger rating
230VAC 50Hz
Length < 5m (16ft) 115VAC 60Hz
Length < 5m (16ft)
24V 40A 2.5mm² / AWG13 4mm² / AWG11
24V 60A 2.5mm² / AWG13 4mm² / AWG11
24V 100A 4mm² / AWG11 6mm² / AWG9
Charger rating
Mains power 230V
50Hz Mains power 115V
60Hz
24V 40A 8A – 30mA 16A – 30mA
24V 60A 10A – 30mA 20A – 20mA
24V 100A 20A – 30mA
-