NOT-DOLPROHD-00
NOT-DOLPROHD-00
EN
CONNECTIONS
INSTALLATION
CONNECTIONS
The charger connections are accessible by
removing the hatch in the front panel. To open
the hatch, remove the mounting screw. Then
rotate the hatch to remove it.
Before connecting the cables, the mains power
cable grommet must be installed and properly
mounted on the case, in its specific hole (hole on
left when viewed from the front of the charger).
The cable grommet is mounted on the case
using the plastic nut supplied. The nut is installed
inside the case. Ensure that the nut is properly
tightened.
CONNECTION DETAILS
Cooling air flow
Mains power
cable grommet
worm
cold
