NOT-DOLPROHD-00
NOT-DOLPROHD-00
WARRANTY
WARRANTY
EN
Warranty
TO PREVENT ANY RISK OF INCORRECT UTILISATION OF
THE CHARGER, CAREFULLY READ THE LIST OF EVENTS OR
POTENTIAL DEFECTS NOT COVERED BY THE PRODUCT
WARRANTY
4
The charger is not protected against batteries
being connected with reverse polarity. Risk of
permanent damage to the charger.
4
If the charger falls or is dropped, the impact
may permanently distort the case or cause the
failure of the internal fans or certain electronic
components.
4
Modifications to the case (in particular, drilling
additional holes) can deposit swarf or metal filings
on the electronics board, causing malfunctions or
permanent damage to the charger.
4
Working on or modifying the electronics board
can result in operating modes for which the
charger was not designed, causing malfunctions
or permanent damage to the charger.
4
Operating the charger on an unsuitable power
supply (generally a mains power voltage that is
too high).
4
Accidental mains power overvoltage or
lightning strike, generally causing permanent
damage to the charger.
4
Replacing fuses by fuses of an incorrect rating
can cause permanent damage to the charger.
4
Obvious connection errors, causing permanent
damage to the charger.
4
Water projections or run-off inside the charger
can cause permanent electronic malfunctions.
Precautions for scrapping
The charger contains electronic components
and materials that must be recycled at the end
of the charger life cycle, in order to protect the
environment.
All chargers, at the end of their life cycle, should
be returned to the local distributor or to a specialist
electronic hardware recycling company.
CE compliance
The charger complies with the applicable
European standards and bears CE marking. The
certificate of conformity is available on request.
