MXP909 PXIe module
User’s Guide –
Dolphin Interconnect Solutions
Page 9
Disconnecting the Cable
Please carefully pull the release tab to release the cable from the locking latches and gently pull the cable out of the connector
guides.
Step 7 - Verify Installation & LEDs
The MXP909 PXIe module comes with 4 RGB LEDs which show the corresponding cable port status according to Table 2: LED
below. The LEDs are visible through cut-outs in the front panel below each port.
LED color
Function
Off
No cable installed, or PXIe not powered
Yellow
Cable installed, no link
Yellow blinking
Temperature overheat warning, please immediately improve cooling to
avoid thermal damages or system shutdown.
White
Cable installed, link operational Gen1 speed
Blue
Cable installed, link operational Gen2 speed
Green blinking
Cable installed, link operational Gen3 speed
Green
Cable installed, link operational Gen4 speed
Red blink
Link Reset
Table 2: LED behavior
